Time Programs (Entries); Basic System Settings (Parameters) - Honeywell Hometronic HCM 200d Operation

Appendix
Factory settings

Time programs (entries)

The following modules are set at the factory:
In the heating area:
All rooms
Mo – Su 06:00
Mo – Su 22:00
For information on creating, deleting or changing time programs,
read Chapter "Adapting time programs" from Page 57 onwards.

Basic system settings (parameters)

Parameter
eco offset
eco thres.
Heating. setp.
Shutter setp.
Light setpoint
Boil. demand
Frost protec.
Remote offs.
Setp. demand
For information on changing the basic system settings, read
Chapter "Adapting basic system settings (parameters)" from
Page 99 onwards.
The "Frost temperature" parameter is only used for display. It
cannot be adjusted.
104
20 °C
16 °C
Setpoint
3.0 °C
17.0 °C
15.0 °C
OPEN
OFF
18.0 °C
8.0 °C
2.0 °C
OFF
Steps
0.5 °C 0 °C ... 50 °C
0.5 °C 0 °C ... 50 °C
0.5 °C 0 °C ... 50 °C
5 % CLOSE ... OPEN
5 % OFF ... ON
0.5 °C 0 °C ... 50 °C
0.5 °C 0 °C ... 50 °C
0.5 °C 0 °C ... 8 °C
– OFF ... ON
Setting