Activating Automatic Brightness Control - Honeywell Hometronic HCM 200d Operation

Operation
Activating functions

Activating automatic brightness control

The display shows the standard
display, for example:
Turn the Dial button until the
►
desired brightness sensor is
displayed on the bottom line,
for example:
Press the Dial button twice.
►
The following text is displayed:
Turn the Dial button to the left
►
until "BA" is displayed.
Press the Dial button twice.
►
The following text is displayed:
If a brightness sensor is installed and assigned to lights/devices, these
lights/devices are controlled according to the setpoints and switching points
of the automatic brightness control.
For information on assigning lamps to a sensor and on changing
setpoints for the automatic brightness control, please read the
Chapter entitled "Adapting automatic brightness control" from
Page 83 onwards.
36
Hometronic
WE 29.09.2002
No Lifestyle active
LIVING
Hometronic
WE 29.09.2002
No Lifestyle active
BRIGHT SOUTH
Change value:
BRIGHT SOUTH
Change value:
BRIGHT SOUTH
Hometronic
WE 29.09.2002
No Lifestyle active
BRIGHT SOUTH
11:15
20.0 C
11:15
OFF
OFF
OK
BA
OK
11:15
BA