Honeywell Hometronic HCM 200d Operation page 20

Hometronic – An Overview
Important information on: Operating modes and functions
Sun protection function (SP)
The position of the shutters depends on the measured brightness
level. The sun protection function is activated via time programs,
lifestyles or manually. Shutters move to the setpoint position if
sun protection is active and the brighness value is reached. The
sun protection function can also be activated/deactivated on a
temperature basis (see the next page).
The following values are required:
•
Switching point for start of shading, e.g. 11:00 a.m.
•
Two brightness values for start and end of shading,
e.g. 80 % and 50 %
•
Setpoint position of shutters for shading, e.g. 50 %
14