Activating Wind Protection; Disabling Hometronic Manager; Setting Room Parameters - Honeywell Hometronic HCM 200d Operation

Activating wind protection

If a wind sensor is installed and assigned to the shutter, the wind
protection is activated automatically as soon as the wind speed
exceeds the set wind threshold.
For information on how to adapt this threshold, read the Chapter
"Adapting wind protection" on Page 87.

Disabling Hometronic Manager

Keep the Back button pressed
►
and press the Dial button
briefly simultaneously.
A key symbol is displayed in
the standard display.
The Hometronic Manager is in disabled mode.
Reversing disabling at the Hometronic Manager
Keep the Back button pressed and press the Dial button
►
briefly simultaneously.
The key symbol disappears. Disabling is reversed.

Setting room parameters

With the room parameters, you can disable radiator controllers,
activate the window function, activate the optimization function
and limit the setpoint range. The functions can be reversed here
as well. The parameters can be changed for all rooms or individ-
ual rooms. With the HR 50, only the disable function for all rooms
is available.
The values of the room parameters are found in Chapter "Basic
system settings (parameters)" on Page 104.
Example: Limit setpoint range for radiator controller HR 80.
Operation
Activating functions
37