Adapting automatic brightness control
This chapter shows you how to:
•
Assigning lamps to a brightness sensor
•
Changing brightness values (threshold values)
•
Adapting lamp brightness to brightness values
Assigning lamps to a brightness sensor
Sensors must be connected correctly and registered with the
Hometronic Manager.
Example: Assigning the lamps in the living room to the brightness
sensor 'bright sensor south'.
Change to the "Settings" submenu as described on Page 54.
►
The display shows the menu items
of the "Settings" submenu, for
example:
Turn the Dial button until "Sen-
►
sor function" is selected.
Press the Dial button.
►
The list with all installed sen-
sors appears in the display.
Press the Dial button.
►
The following text is displayed:
Press the Dial button.
►
The following text is displayed:
Adapting automatic brightness control
INSTALLATION
DE-INSTALLATION
FUNCTION EXPANSION
SENSOR FUNCTION
INSTALLATION
DE-INSTALLATION
FUNCTION EXPANSION
SENSOR FUNCTION
SELECT SENSOR:
SENSOR SOUTH
SENSOR WEST
WIND SENSOR
SENSOR ASSIGNMENT
FUNCTION PARAMETERS
SENSOR SOUTH
Assign module
SHUTT LIV
LIGHT LIV
Adaptation
83