Eco Mode (Economy Mode) - Honeywell Hometronic HCM 200d Operation

Hometronic – An Overview
Important information on: Operating modes and functions

eco mode (economy mode)

In eco mode* the setpoint temperature is lowered to a specified
value (eco lowering value) in all the rooms.
Room temperature setpoint, eco lowering value and eco limit
If the setpoint temperature of a room (room temperature setpoint)
is above the eco limit, it is lowered by the eco lowering value.
If the setpoint temperature is below the eco limit, it remains out-
side eco mode.
Values for the eco lowering value and eco limit are set in the
basic system settings in the factory, and room temperature set-
points are specified in the time programs (see appendix, from
Page 104 onwards).
For information on changing the basic system settings, refer to
Chapter "Adapting basic system settings (parameters)" from
Page 99 onwards. For information on creating, deleting or chang-
ing the time programs, read the Chapter "Adapting time pro-
grams" from Page 57 onwards.
Example:
11