Glossary - Honeywell Hometronic HCM 200d Operation

Glossary

Actions (free)
Remaining
which can be assigned to a life-
style. Limited to 1600.
Auto/Manual button
Button
automatic
mode.
Automatic brightness control
Switching
under certain light conditions. Only
in combination with a brightness
sensor.
Automatic mode
Refer to the Chapter on "Important
information on" from Page 9 on-
wards.
Basic system settings
Refer to the parameters.
Binding
Assignment
HCM 200d.
Boiler feedback
Controlling of the heating boiler
with an analogue control device
from Honeywell.
Boiler request
Hometronic controls the heating
boiler via a setpoint.
Button battery
Battery with the designation LR 03.
number of
for changing between
mode and
behaviour of
of components
Cursor
Flashing rectangle in the display of
entries
the Hometronic Manager. It selects
values, menu entries and modules.
Display
Digital, 4-line display area at the
Hometronic Manager.
manual
eco thres.
Setpoint which prevents the room
temperature from dropping below a
lamps
specific value during eco mode.
eco lowering value
Temperature value by which the
current setpoints of the installed
rooms are to be lowered when eco
mode is activated.
eco mode
Refer to the Chapter on "Important
information on" from Page 9.
Entry
Setpoints and switching points
to
which are assigned to a module or
room (refer to the time program).
Free switching points
Remaining
which can be assigned to a time
program. Limited to 1600.
Frost protection
Setpoint which prevents the tem-
perature from dropping below a
critical value in certain rooms.
Appendix
Glossary
number of entries
116