Honeywell Hometronic HCM 200d Operation page 24

Hometronic – An Overview
Important information on: Operating modes and functions
Automatic brightness control (BA)
You control the light in the building or in the outside area via a
brightness sensor. The following values are required for this:
•
Lower automatic threshold value, e.g. 20 %
•
Upper automatic threshold value, e.g. 30 %
•
Lower illumination value, e.g. ON
•
Upper illumination value, e.g. OFF
For information on adapting the setpoint for the function de-
scribed above, please read the Chapter entitled "Adapting auto-
matic brightness control" from Page 83 onwards.
Example:
From 6:00 a.m. on, the light (device) is to be switched on and off
automatically. If the brightness value is under 20 %, the light
(device) switches on. The light (device) switches off if the bright-
ness value reaches 30 %.
18