Status Display - Honeywell Hometronic HCM 200d Operation

Status display

If the symbol "!" is displayed in the standard display, the Home-
tronic Manager can show you the Hometronic module at which
the problem occurs.
Change to the "Display" submenu as described on Page 39.
►
The following text is displayed:
Press the Dial button.
►
The modules with which a prob-
lem occurred are displayed with
the cause of the error, for ex-
ample:
The
cates communication errors or an invalid value.
The status display for the radiator controller HR 80 is displayed
via the room names. If several HR 80s are installed in a room, a
note for the room may appear several times, i.e. for each device
signaling an error.
Eliminate the problem as described in the respective operating
►
instructions.
Press the Back button in order to leave the submenu.
►
symbol indicates weak batteries, and the "!" symbol indi-
Reading system values
STATUS
SENSOR VALUES
ROOM TEMPERATURES
CONSUMPTION COUNTERS
Hometronic Manager
SENSOR SOUTH
LIVING
Extern. temper.
Operation
!
43