Saving System Settings - Honeywell Hometronic HCM 200d Operation

You are in the "Settings" submenu.
Turn the Dial button to the left
►
in order to make additional
menu points visible.

Saving system settings

Every saving of the settings overwrites the previously saved
settings!
Change to the "Settings" submenu as described on Page 54.
►
The display shows the menu
items of the "Settings" sub-
menu:
Turn the Dial button to the left
►
until "Configuration" is selected:
Press the Dial button.
►
The following text is displayed:
Press the Dial button.
►
The following text is displayed
after saving:
Press the Back button in order to leave the submenu.
►
The current settings are saved.
The "Factory settings" function is only intended for the new instal-
lation of your Hometronic Manager. Refer to the mounting in-
structions on how to restore them.
Saving and getting system settings
INTERNET PARAMETERS
CHANGE NAMES
CONFIGURATION
LOCAL OPERATION LOCK
INSTALLATION
DE-INSTALLATION
FUNCTION EXPANSION
SENSOR FUNCTION
INTERNET PARAMETERS
CHANGE NAMES
CONFIGURATION
LOCAL OPERATION LOCK
SAVE CONFIGURATION
Previous configurat.
will be deleted!
NO
SAVE CONFIGURATION
!! FINISHED!!
Adaptation
YES
55