Setting Temperature-Dependent Sun Protection (Shading) Of A Shutter - Honeywell Hometronic HCM 200d Operation

Adaptation
Adapting sun protection function of a shutter
Press the Dial button.
►
The following text is displayed:
"--" (corresponds to 0-second runtime) is underlined. The value
can be changed in steps of 1/10 of a second.
Turn the Dial button until the
►
desired value is displayed.
The following text, for example,
is displayed:
Press the Dial button.
►
The following text is displayed:
Press the Dial button.
►
The following text is displayed:
The living room shutter opens to 90 % at sunrise. The slats incline within
2 seconds.
Proceed analogously in order to adapt the values for the sun-
►
set and the sun protection function.
Press the Back button in order to leave the submenu.
►
Setting temperature-dependent sun protection (shading) of a
shutter
In addition to the listed options, you can also control sun
protection of a shutter based on temperature. You specify
whether the shutters are controlled via the outside or inside
temperature (see Chapter "Functions" from Page 12).
The shutter must be assigned to a temperature sensor (see
Chapter "Assigning a shutter to a sensor" on Page 73).
78
SHUTT LIV
Sunrise
SHUTT LIV
Sunrise
SHUTT LIV
Sunrise
SENSOR SOUTH
Sunrise
Sunset
Sun prot. on
90%--
OK
90%20
OK
90%20
OK
90%20
CLOSE
50%--