Installing Boiler Relay - Honeywell Hometronic HCM 200d Operation

Operation
Thermostat control with boiler feedback

Installing boiler relay

Example: Install HC60NG as boiler relay.
Activate binding at the HC60NG as described in the operating
►
instructions of the HC60NG.
Switch to the "Settings" submenu as described on Page 54.
►
Turn the Dial button until "Installation" is selected.
►
Press the Dial button.
►
The following text is displayed:
Turn the Dial button to the left
►
until "Boiler demand" is se-
lected.
Press the Dial button.
►
The following text is displayed:
Turn the Dial button to the left
►
until "Boiler relay" is selected.
Press the Dial button.
►
An "*" appears after the "Boiler
relay" entry.
The HC60NG is installed as a boiler relay.
52
HEATING/COOLING
SHUTTER
DEVICES/LIGHTS
SENSOR
SENSOR
ROOM SENSOR/SELECTOR
ROOM CONTROL
BOILER DEMAND
SWITCHING MODULE
FROST PROTEC. SENSOR
THERMOSTAT
BOILER RELAY
SWITCHING MODULE
FROST PROTEC. SENSOR
THERMOSTAT
BOILER RELAY
SWITCHING MODULE
FROST PROTEC. SENSOR
THERMOSTAT
BOILER RELAY *