Honeywell Hometronic HCM 200d Operation page 121

Receiving test message at HCM 200d
Example: Receiving test message from HR 80.
Prerequisite: The HR 80 is installed as a room.
Switch the HR 80 to Service mode as described in the operat-
►
ing instructions of the HR 80.
Switch to the "Settings" submenu at the HCM 200d as de-
►
scribed on Page 54.
Turn the Dial button until "Installation" is selected.
►
Press the Dial button.
►
The following text is displayed:
Turn the Dial button to the left
►
until "Test msg. receipt" is se-
lected.
Press the Dial button.
►
The following text is displayed:
The device number of the received device, the field strength (1 = sufficient
field strength, 5 = very good field strength) and the number of received test
messages are displayed.
Help with problems
HEATING/COOLING
SHUTTER
DEVICES/LIGHTS
SENSOR
BOILER DEMAND
LIFESTYLE
TELEINTERFACE
TEST MSG. RECEIPT
Device No. 04-002628
Field strength
Received Msg.
Appendix
4
12
115