Getting System Setting - Honeywell Hometronic HCM 200d Operation

Adaptation
Saving and getting system settings

Getting system setting

If you try to access the saved settings, the changes made since
the last saving are discarded!
Change to the "Settings" submenu as described on Page 54.
►
The display shows the menu
items of the "Settings" sub-
menu:
Turn the Dial button to the left
►
until "Configuration" is selected:
Press the Dial button.
►
The following text is displayed:
Turn the Dial button until "Load
►
configuration" is selected.
Press the Dial button.
►
The following text is displayed:
Press the Dial button
►
The following text is displayed:
The settings saved beforehand are restored.
After the values last saved have been restored, the standard display is
displayed again.
56
INSTALLATION
DE-INSTALLATION
FUNCTION EXPANSION
SENSOR FUNCTION
INTERNET PARAMETERS
CHANGE NAMES
CONFIGURATION
LOCAL OPERATION LOCK
SAVE CONFIGURATION
GET CONFIGURATION
FACTORY SETUP
SAVE CONFIGURATION
LOAD CONFIGURATION
FACTORY SETUP
LOAD CONFIGURATION
Actual configuration
will be deleted!
NO
LOAD CONFIGURATION
!! PLEASE WAIT!!
YES