Remove An Entire Building With All Its Floors; Use The Wifi Auto Planning Advisor To Generate An Rf Plan For A Floor - NETGEAR ProSAFE WC7500 User Manual

The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the Trashcan
8. Confirm the removal.
The floor is removed.

Remove an Entire Building With All Its Floors

You can remove an entire building with all its floors. However, you cannot remove the default
building.

To remove an entire building:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4. Select Plans > Layout.
The page displays the Planning icons.
5. In the building tree on the left, click the building name.
6. Click the Trashcan
7. Confirm the removal.
The building with all its floors is removed.
Use the WiFi Auto Planning Advisor to Generate an RF Plan
for a Floor
After you define a building and floors (see
page 56), you can run the WiFi auto planning advisor for a floor. This tool calculates the
number of access points and, optionally, antennas that you might need to provide WiFi
coverage for your environment and suggests the best locations on the floor for these access
points and antennas.
ProSAFE Wireless Controller
icon.
icon.
Manage a Building and Floors for an RF Plan
RF Planning and Deployment
70
on