Table of Contents
Advertisement
5.
Select the tab for the model access point that you want to configure.
6.
Select a radio button:
•
Enable all LEDs. All LEDs function normally. This is the default selection.
•
Enable Power LED. Only the Power LED functions and the other LEDs are off.
•
Disable All LEDs. All LEDs are off.
7.
Click the Apply button.
Your settings are saved.
Manage the LED Behavior for an Advanced Profile Group
For each advanced profile group, you can manage the LED behavior of WN370, WAC720,
WAC730, and WAC740 access points that support the profile group.
To manage the LED behavior of WN370, WAC720, WAC730, or WAC740 access points
that support an advanced profile group:
1.
Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2.
Enter your user name and password.
3.
Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4.
Select Configuration > Profile > Advanced > AP LED State.
ProSAFE Wireless Controller
Configure WiFi and QoS Settings
216
Hide quick links:
Advertisement
Table of Contents
