Table of Contents
Advertisement
7.
Configure the settings as described in the following table.
Setting
Portal Settings section
Portal Type
Radius Server
Note:
This setting is for a
captive portal only.
Redirect URL
Max Clients Per User
Reauthentication
Timeout
Select Placement
Manage Rogue Access Points, Guest Network Access, and Users
ProSAFE Wireless Controller
Description
Select one of the following radio buttons:
•
Guest. A guest portal with a field for entering an email address.
Guests do not need to provide a password and can get unlimited access to
the network. You do not need to configure guest accounts.
•
Captive. A captive portal with a field for entering a login user name and a
field for entering a password.
If you select this option, the Radius Server radio buttons and menu display.
For information about how to configure captive portal users and accounts,
see
Manage Users, Accounts, and Passwords
Select one of the following radio buttons:
•
Local. Use the local authentication server.
•
External. Select an external authentication server from the menu.
Note:
For information about setting up and enabling internal and external
authentication servers, see
Server Groups
on page 140.
To redirect traffic to a URL after successful captive authentication, select the
check box and enter the URL.
By default, traffic is not redirected.
Specify the number of clients that a single captive portal user can open with the
same the login information.
The default setting is 1. The maximum number of clients that you can select
from the menu is 5.
Specify the period after which a user who was idle must be reauthenticated.
The minimum period is 30 minutes. The maximum period that you can select
through the menus is 24 hours.
Click the Center, Bottom, or Top button to specify the location of the login
prompt on the login page.
232
on page 236.
Manage Authentication Servers and Authentication
Hide quick links:
Advertisement
Table of Contents
