Table of Contents
Advertisement
Setting
Status
Status
(continued)
Site
Group Name
Tip:
To view all members of a profile group, sort the access points by
profile group. You do this by clicking the icon next to the Group Name
header in the table.
5.
Take one of the following actions:
•
Assign a single access point to another group, or building, floor, or a combination of
these by selecting the check box to the right of the access point.
•
Assign a selection of access points to another group, building, or floor, or a
combination of these by selecting the check boxes to the right of the access points.
ProSAFE Wireless Controller
Description
Shows one of the following states:
•
Authentication in progress. This state occurs during the discovery and
upgrade process of a standalone access point when the wireless controller logs
in to the access point using the access point's password. This state can last
several minutes.
•
Firmware upgrade. This state occurs after the access point receives the
firmware file when the access point upgrades to the new firmware. This state
can last several minutes.
•
AP is rebooting. This state occurs after the firmware upgrade process
completes when the access point reboots.
•
Applying configurations. This state occurs after the wireless controller
upgrades the firmware on the access point when the wireless controller pushes
the WiFi configurations to the access point.
•
Connecting. This state occurs when the wireless controller attempts to establish
a management connection with the access point.
Make sure that a DHCP server is enabled in the network. Otherwise, the access
point remains in the Connecting state and does not transition to the Connected
state.
•
Connected. This state indicates that the firmware upgrade of the access point
was successful, the WiFi configurations were pushed to the access point, and
the access point is managed by the wireless controller.
•
Not Connected. This state indicates that the wireless controller cannot
communicate with the access point at the configured IP address. The wireless
controller attempts to log in to access points each minute. If the error is
temporary, the state automatically changes to Connected. If the error is
prolonged, verify the access point's IP address and network connectivity. For
more information, see
Shows whether you designated the access point as a local or remote one:
•
Local. The access point is designated as a local.
•
Remote. The access point is designated as remote.
For more information about designating an access point as local or remote, see
Discover Access Points With the Discovery Wizard
The profile group to which the access point is assigned. For information about
selecting a group, see
Step
By default, the group designation is basic.
For information about creating profile groups and their associated security profiles,
see
Manage Security Profiles for Advanced Profile Groups
Discover and Manage Access Points
176
Resolve Problems With Access Points
on page 159.
8.
on page 365.
on page 129.
Hide quick links:
Advertisement
Table of Contents
