NETGEAR ProSAFE WC7500 User Manual page 352

The following table describes the fields of the AP Details pop-up window.
Item
AP Info
This information is self-explanatory.
Profile Info
For each security profile that is configured on the selected access point, the following information
displays:
Type
SSID
Security
VLAN
Client Info
The information that displays depends on the type and security of the connection between the client
and the access point.
For each WiFi client that is connected to the selected access point, some or all of the following
information displays:
MAC
IP
Channel
SSID
Security
Rogue AP Info
For all rogue and unmanaged neighboring access points combined that the selected managed access
point detected, the following information displays:
Type
Reported
In Same Channel
Monitor the WiFi Network and Its Components
ProSAFE Wireless Controller
Description
The type of profile (802.11b/bg/ng or 802.11a/na/ac).
The WiFi network SSID for the security profile.
The security mode (Open, WEP, WPA, WPA2, or WPA/WPA2) for the
security profile.
The VLAN ID or VLAN name for the security profile.
The MAC address of the WiFi client.
The IP address of the client.
The channel that the WiFi client is using to connect to the access point.
The WiFi network SSID that the WiFi client is using to connect to the access
point.
The security mode that the WiFi client is using to connect to the access
point (Open, WEP, WPA, WPA2, or WPA/WPA2).
The type of profile that the rogue access point is using to connect to the
access point (802.11b/bg/ng or 802.11a/na/ac).
The total number of detected rogue access points in the wireless mode.
The total number of detected rogue access points in the same channel.
352