Save And View The Logs On A Controller-Managed Access Point - NETGEAR ProSAFE WC7500 User Manual

The Upgrade page displays. The page states the current firmware version that is
running on the access point.
g. Reconfigure the static IP address setting and the VLAN settings or reenable the
DHCP client.
For more information, see
Controller-Managed Access Point
a Controller-Managed Access Point
Save and View the Logs on a Controller-Managed Access
Point
You can save and view the logs on a controller-managed access point. For some access
point models, you can also view the console debug logs (see
of an Access Point

To save and view the logs on a controller-managed access point:
1. Find the IP address of the access point on your network.
For more information, see
2. In the address bar, enter the IP address of the access point.
A login window displays.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Select Configuration > Logs > AP Logs.
5. Click the SAVE button.
6. Follow the directions of your browser.
7. Unzip the logs.
The file with logs is a .tar file in the following format: aplogs_<mac_addr>.tar
ProSAFE Wireless Controller
Change IP Address and VLAN Settings on a
on page 369).
Manage the Managed AP List
Controller-Managed Access Points
on page 376 and Reenable the DHCP Client on
on page 377.
View the Console Debug Logs
on page 167.
381