Specify Session Time-Outs - NETGEAR ProSAFE WC7500 User Manual

5. Enable SNMP and configure the settings as described in the following table.
Setting
SNMP
Read-Only Community Name
Read-Write Community Name
Trap Community Name
IP Address to Receive Traps
Trap Port
SNMP Manager IP
6. Click the Apply button.
Your settings are saved.

Specify Session Time-Outs

If an HTTP session times out, the user is redirected to the login page for password
verification.
ProSAFE Wireless Controller
Description
Select the SNMP check box to enable SNMP for the wireless controller.
Enter the community string that allows the SNMP manager to read the
wireless controller's MIB objects.
The default setting is public.
Enter the community string that allows the SNMP manager to read and
write the wireless controller's MIB objects.
The default setting is private.
Enter the community name that is associated with the IP address to
receive traps.
The default setting is trap.
Enter the IP address at which the SNMP manager receives traps sent from
the wireless controller.
Enter the port on which the SNMP manager receives traps sent from the
wireless controller.
The default setting is port 162.
Enter the IP address of the SNMP manager.
To allow any SNMP manager to access the wireless controller, keep this
field blank.
Maintain the Wireless Controller and Access Points
263