View The Clients In The Network - NETGEAR ProSAFE WC7500 User Manual

11. Click the OK button.
The AP Details pop-up window closes, and the network Access Point page displays
again.

View the Clients in the Network

You can view all clients that are connected to managed access points and see which wireless
controller manages a particular access point.

To view the Clients page:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4. Select Monitor > Network > Clients.
The Clients page displays. Because this page is a wide page, it is shown in the following
two figures.
ProSAFE Wireless Controller
Monitor the WiFi Network and Its Components
318