The wireless controller's web management interface opens and displays the Summary
page.
4.
Select Configuration > WLAN Network.
The settings are described in the following table.
Setting
IP
MAC
Model
Name
Building
Floor
ProSAFE Wireless Controller
Description
The IP address of the access point.
The MAC address of the access point.
The model of the access point.
The name that you specified for the access point.
The building to which the access point is assigned. For information about selecting a
building, see
Step
6.
By default, the building designation is Building-1.
For information about how to set up a custom building, see
Floors for an RF Plan
on page 56.
The floor to which the access point is assigned. For information about selecting a
floor, see
Step
7.
By default, the floor designation is Floor-1.
For information about how to set up a custom floor, see
Floors for an RF Plan
on page 56.
Discover and Manage Access Points
175
Manage a Building and
Manage a Building and