Manage Certificates - NETGEAR ProSAFE WC7500 User Manual

These fields are self-explanatory.
9. In the Registration Key field at the top of the page, enter the registration key for the license
that you want to add and register.
10. Click the Add button.
The license is added to the table. The key details in the table mean the same as the key
details that are shown on the Inventory page (see the Key Details section in the table in
View Your Licenses
11. Click the Apply button.
Your license is registered.
12. To register another license, repeat these steps.

Manage Certificates

The internal authentication server for certificate-based authentication requires you to install a
certificate on the wireless controller. A default self-signed server certificate is installed on the
wireless controller. However, we strongly recommend that you replace this default certificate
with a custom certificate issued for your site or domain by a trusted certificate authority (CA).
To obtain a security certificate for the wireless controller, generate and submit a certificate
signing request (CSR) to the CA of your choice. Upon receiving the CA-signed server
certificate, install the certificate from your computer as described in this section. Certificates
must be in X.509 PEM format.

To add certificates:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4. Select Configuration > System > Certificates.
Configure the System and Network Settings and Register the Licenses
ProSAFE Wireless Controller
on page 274).
113