Manage The Ip, Vlan, And Link Aggregation Settings; Management Vlan Concepts - NETGEAR ProSAFE WC7500 User Manual

4. Select Configuration > System > Time.
5. Configure the settings as described in the following table.
Setting
Time Zone
Current Time
NTP Client
Use Custom NTP Server Select the Use Custom NTP Server check box if you want to use an alternate
Hostname/IP Address
6. Click the Apply button.
Your settings are saved.

Manage the IP, VLAN, and Link Aggregation Settings

You can manage the IP address, VLAN settings, and link aggregation (LAG) settings of the
wireless controller.

Management VLAN Concepts

Management VLANs are used for all SNMP and HTTP traffic to and from the wireless
controller and managed access points.
For large deployments, we recommend that the wireless controller and access points are in
separate VLANs to ensure uninterrupted connectivity between the wireless controller and the
access points.
Configure the System and Network Settings and Register the Licenses
ProSAFE Wireless Controller
Description
From the menu, select the local time zone for your country or region.
This field is a nonconfigurable field that displays the current time at your
location.
Select the Enable radio button to use a Network Time Protocol (NTP) server to
synchronize the clock of the wireless controller and managed access points.
Select the Disable radio button if you do not want to use an NTP server.
NTP server. By default, the NETGEAR NTP server is used.
Enter the host name or IP address of the NTP server, if you are using a custom
NTP server.
102