Table of Contents
Advertisement
5.
In the Syslog Settings section of the page, configure the settings as described in the
following table.
Setting
Enable Syslog
Log Level
Syslog Location
Syslog Server IP Address Enter the IP address to which the wireless controller and managed access
Server Port Number
6.
Click the Apply button.
Your settings are saved.
Configure the System and Network Settings and Register the Licenses
ProSAFE Wireless Controller
Description
Enable the syslog settings using the Enable Syslog check box to forward
system wide logs to an external syslog server or to save to a storage device
such as a USB or SD card connected to the wireless controller. By default, the
syslog settings are disabled.
From the Log Level menu, select one of the following levels:
•
LOG_LEVEL_CRIT. Critical errors only are logged.
•
LOG_LEVEL_ERR. Noncritical errors and critical errors are logged.
•
LOG_LEVEL_WARN. Warnings, noncritical errors, and critical errors are
logged.
•
LOG_LEVEL_NOTICE. Notifications, warnings, noncritical errors, and
critical errors are logged.
•
LOG_LEVEL_INFO. Informational messages, notifications, warnings,
noncritical errors, and critical errors are logged.
Select the External radio button if your network includes a syslog server.
points send all syslogs, if the Enable Syslog check box is selected.
Note:
Before you configure the IP address of the syslog server on the wireless
controller, make sure that you set up a syslog server (such as a computer running
a syslog service) and that the syslog server is available on the network.
Enter the number of the port at which your syslog server is configured to listen to
requests.
117
Hide quick links:
Advertisement
Table of Contents
