Table of Contents
Advertisement
Table 15. Password requirements (continued)
Web Management Interface Path
Advanced profile:
1.
Select Configuration >
Profile > Advanced >
Radio.
2.
Select a group.
3.
Click Edit.
4.
Select a profile.
5.
Make a selection from
the Network
Authentication menu.
Select Configuration >
Security > Authentication
Server.
1. If your admin password contains special characters (for example, P, !, @, #, $, %, or ^) and you upgrade the
firmware from version 4.x to version 5.x, you first must change the password to one with alphanumeric characters
only (for example, password4285) before you upgrade the firmware. Make sure that you back up the configuration
before you upgrade the firmware. After you successfully upgrade the firmware to version 5.x, you can change the
password back to your original password with special characters.
Factory Default Settings, Technical Specifications, and Passwords Requirements
ProSAFE Wireless Controller
User Type
or
Data Encryption
Shared Key 64-bit WEP
128-bit WEP
152-bit WEP
WPA-PSK
TKIP
TKIP + AES
WPA2-PSK AES
TKIP + AES
WPA-PSK
TKIP + AES
&
WPA2-PSK
External
Shared Secret
RADIUS
Server
External
Domain Admin User
LDAP
Server
390
Restrictions
Allowed
Length
Characters
Hexadecimal
10 fixed
Hexadecimal
26 fixed
Hexadecimal
32 fixed
Alphanumerics and
Up to 63
special characters,
excluding quotes
Up to 127 See
Alphanumerics and
special characters
Alphanumerics and
Up to 32
special characters
Section in
This Manual
See
Manage
Security
Profiles for
Advanced
Profile
Groups
on
page 129.
Manage
Authentication
Servers and
Authentication
Server
Groups
on
page 140.
Hide quick links:
Advertisement
Table of Contents
