Remove A Building Obstacle From A Floor - NETGEAR ProSAFE WC7500 User Manual

f. Click the Obstacle
g. Select the icon for the custom obstacle that you just added.
9. Select a line between two points on the map by anchoring the line at one point and releasing
the line at the other point.
10. To remove the obstacle, click the Undo link, and repeat
11. Click the Save
Your settings are saved.
12. To add another obstacle repeat

Remove a Building Obstacle From a Floor

After you add and save a WiFi building obstacle on a floor, you can remove it from the floor.

To remove a WiFi building obstacle from a floor:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4. Select Plans > Planning.
The page displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor.
The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the Obstacle
8. Click the obstacle on the map.
9. Click the Delete link.
10. Click the Save
Your settings are saved.
11. To remove another obstacle, repeat
ProSAFE Wireless Controller
icon.
icon.
Step 7 though
icon.
icon.
Step 7
RF Planning and Deployment
64
Step 7 though
Step 11.
though Step 10.
Step 9.