Import A List Of Known Access Points From A File - NETGEAR ProSAFE WC7500 User Manual

• Unknown. Moves the selected access points to the unknown list.
6. For each known access point, enter a name in the Name column.
A name allows access points to be more easily identified.
7. Click the Apply button.
Your settings are saved.

Import a List of Known Access Points From a File

You can import a list of known access points from a saved file. Create a text file that includes
the MAC address of each access point, one MAC address per line. The wireless controller
can support a total of up to 512 access points from the known and unknown lists combined.

To import a list of known access points from a file:
1. Create a text file that includes a list of MAC addresses for the access points. Each MAC
address must be on a separate line with hard returns between lines as shown in the
following example:
00:00:11:11:22:29
00:00:11:11:22:28
00:00:11:11:22:27
00:00:11:11:22:26
00:00:11:11:22:25
2. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
3. Enter your user name and password.
4. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
5. Select Configuration > Security > Advanced > Rogue AP.
The advanced Rogue AP page displays.
6. Click the Browse button, navigate to the file containing the list of known access points, and
select it.
7. Next to Import Known List, select one of the following radio buttons:
• Merge. Merges the list of access points that you intend to import with the access points
that are already present in the Rogue List.
• Replace. Replaces the access points that are present in the Rogue List with the
access points in the file that you intend to import.
8. Click the Import button.
Manage Rogue Access Points, Guest Network Access, and Users
ProSAFE Wireless Controller
222