Define And Edit Buildings And Floors - NETGEAR ProSafe WC7520 Reference Manual

• Total number of users and number of users per access point.
• Radio type or types.
• Desired data rates for access points.
• Identify areas where you do not necessarily want coverage.
• Identify areas where you cannot deploy an access point.
Use a worksheet similar to the following to collect your information.
Table 3. Building planning worksheet
Building dimensions
Height
Width
Number of floors
User information
Number of users
Users per access point
Radio types
Access point desired signal rate
802.11b/bg/ng
802.11a/na
Don't care/don't deploy areas

Define and Edit Buildings and Floors

This section explains how you can define your buildings and floors, and make modifications
after you have defined them. You can add a maximum of three buildings.

To define a building:
1. Select Plans > Layout. The Layout Buildings screen displays:
ProSafe 20-AP Wireless Controller WC7520
RF Planning
41