NETGEAR ProSAFE WC7500 User Manual page 77

8. Specify the access point settings as described in the following table.
Setting Description
AP name Enter a name for the access point.
By default, the access points are numbered, for example, AP-16.
AP Model Specify the access point that you intend to use for the floor:
1.
2.
3.
Price($) As an option, enter the price of the access point.
IP Address As an option, enter the IP address of the access point.
Note:
address automatically, you can enter any IP address. If you intend to assign a static IP
address to a deployed access point, enter the IP address that you want to set aside for
the access point.
AP Type When you select an access point, this field is populated automatically.
Description As an option, enter a description for the access point.
ProSAFE Wireless Controller
Click the Browse button.
The access points that the wireless controller supports display in a pop-up window.
Click the access point.
All calculations are performed with the selected access point.
Click the Confirm button.
Your settings are saved and the pop-up window closes.
If your network uses a DHCP server and a deployed access point receives an IP
RF Planning and Deployment
77