Factory Default Settings; Technical Specifications Models Wc7500 And Wc7600V2 - NETGEAR ProSAFE WC7500 User Manual

Factory Default Settings

You can restore the wireless controller to its factory default settings on the Reboot/Reset
Controllers page (see
button on the front panel (see
page 364). The wireless controller returns to the factory configuration settings that are shown
in the following table.
Table 12. Factory default settings for the wireless controller
Feature
Login User login URL
User name (case-sensitive)
Login password (case-sensitive)
LAN LAN IP
Subnet mask
Default gateway
DHCP server pools
Time zone
Time zone adjusted for daylight
saving time
SNMP

Technical Specifications Models WC7500 and WC7600v2

The following table lists the technical and physical specifications for models WC7500 and
WC7600v2.
Table 13. Technical and physical specifications models WC7500 and WC7600v2
Feature
Electrical specifications
Dimensions (W x H x D) cm
Dimensions (W x H x D) in.
Weight
Operating temperatures
Operating humidity
Factory Default Settings, Technical Specifications, and Passwords Requirements
ProSAFE Wireless Controller
Reboot the Wireless Controller
Use the Reset Button to Restore Default Settings
Default Setting
http:192.168.0.250
admin
password
192.168.0.250
255.255.255.0
192.168.0.1
None
USA Pacific Standard Time (PST)
Enabled
Enabled
Default Setting
• 100–240V, 3A, 50–60 Hz AC input
• Typical power consumption 12 W
44 cm x 4.5 cm x 26.3 cm (Fits in a 1U rack)
17.3 in. x 1.7 in. x 10.3 in. (Fits in a 1U rack)
7.9 kg (3.6 lb)
0° to 45°C (32° to 113°F)
10% minimum to 90% maximum relative humidity
387
on page 259) or by using the Reset
on