The inventory is based on the antennas that you added by running the WiFi auto planning
advisor (see
Use the WiFi Auto Planning Advisor to Generate an RF Plan for a Floor
page 70), the antennas that you added manually (see
Antennas on a Floor Map for an RF Plan
10.
To change the properties for an antenna in the inventory, do the following:
a. Select the antenna in the inventory table.
b. Click the Edit Properties button.
The Edit Antenna pop-up window opens.
c. Change the properties.
For more information about changing the properties, or for information about
removing an access point from the inventory, see
Antennas on a Floor Map for an RF Plan
d. Click the Confirm button.
Your settings are saved and the pop-up window closes.
11.
On the Inventory pop-up window, click the OK button.
The Inventory pop-up window closes.
12.
To save the inventory changes, click the Save
The settings are saved.
ProSAFE Wireless Controller
on page 79), or a combination of both.
on page 79.
RF Planning and Deployment
86
Manually Add and Manage
Manually Add and Manage
icon.
on