Wc7600 And Wc9500 Back Panel Components - NETGEAR ProSAFE WC7500 User Manual

From left to right, the front panel of models WC7600 and WC9500 show the components that
are described in the following table.
Table 4. Front panel components models WC7600 and WC9500
Component
Digital counter
System LEDs
Reset button
USB port
SFP+ slots and LEDs
Ethernet port and LEDs
Console port

WC7600 and WC9500 Back Panel Components

The wireless controller comes with a single internal power supply but supports an optional
second power supply for power redundancy. The power supplies are hot-swappable.
The following figure shows the back panel of the wireless controller with a single internal
power supply, the power supply connector, and two double fans.
Removable power supply
Power supply connector
Figure 7. Back panel models WC7600 and WC9500
ProSAFE Wireless Controller
Description
Displays the number of connected access points that are in a healthy state.
From top to bottom: Power LED, Status LED, Fan LED, and Stack Master LED.
These LEDs are described in
Using a sharp object, press and hold this button for about 10 seconds until the Status
LED blinks and the wireless controller returns to factory default settings.
If you reset the wireless controller, all configuration settings are lost and the default
password is restored.
One USB 2.0 port for external storage of floor heat maps, saving of the syslogs, and
backing up the configuration. The USB port supports FAT32 file systems.
Two SFP+ slots for optional 10GE SFP+ or 1G SFP gigabit interface converters
(GBICs), each slot with an LED.
One 10/100/1000 Mbps LAN Ethernet port with an RJ-45 connector, left LED, and
right LED. The Ethernet port provides switched N-way, automatic speed negotiating,
auto MDI/MDIX technology.
RS232 port for connecting to an optional console terminal. The port provides a DB9
male connector. The default baud rate is 9600 bits/second.
Note: The console port is for debugging under guidance of NETGEAR technical
support only.
Removable fans
Hardware Descriptions
23
Table 5 on page 25.
Slot for an optional
second power supply