Monitor Blacklisted Clients - NETGEAR ProSAFE WC7500 User Manual

The following table describes the fields of the Client Details pop-up window.
Item
MAC
Access Point
BSSID
SSID
Frequency
Auth
Client Type
Cipher
AID
RSSI
Tx Power
Tx Rate
Tx Bytes
Rx Rate
Rx Bytes
Tx packets
Rx Packets
12. Click the OK button.
The Client Details pop-up window closes, and the Local Client List page displays again.

Monitor Blacklisted Clients

You can monitor all clients that were denied access to the network by all wireless controllers in
the network.
Note: Monitoring of blacklisted clients is supported on models WC7600 and
WC9500 but not on models WC7500 and WC7600v2.
ProSAFE Wireless Controller
Description
The MAC address of the WiFi client.
The name of the access point to which the WiFi client is connected.
The MAC address of the access point's radio to which the WiFi client is
connected.
The WiFi network SSID that the WiFi client is using to connect to the access
point.
The channel frequency that the WiFi client is using to connect to the access
point.
The security mode that the WiFi client is using to connect to the access
point (Open, WEP, WPA, WPA2, or WPA/WPA2).
The wireless mode that the WiFi client is using to connect to the access
point (802.11ng, 802.11bg, 802.11b, 802.11ac, 802.11na, or 802.11a).
The type of encryption that the WiFi client is using (None, WEP, AES, TKIP,
or TKIP + AES).
The association ID of the client.
The received signal strength indicator (RSSI) of the WiFi client.
The transmit power of the WiFi client.
The transmit rate in Mbps of the WiFi client.
The number of bytes that the WiFi client transmitted.
The receive rate in Mbps of the WiFi client.
The number of bytes that the WiFi client received.
The number of packets that the WiFi client transmitted.
The number of packets that the WiFi client received.
Monitor the WiFi Network and Its Components
357