View Access Points That The Wireless Controller Manages - NETGEAR ProSAFE WC7500 User Manual

Data for the 2.4 GHz network (for the combined 802.11b, 802.11bg, and 802.11ng
modes) is shown in purple; data for the 5 GHz network (for the combined 802.11a,
802.11na, and 802.11ac modes) is shown in green. The page shows the following graphs:
• AP Usage. Displays the 2.4 GHz and 5 GHz traffic usage in MB for access points.
• SSID Usage. Displays the 2.4 GHz and 5 GHz traffic usage in MB for SSIDs.
• Number of Clients. Displays the total number of clients, number of clients in the
2.4 GHz network, and number of clients in the 5 GHz network over a period.
5. To display the latest information onscreen, click the REFRESH button.

View Access Points That the Wireless Controller Manages

You can monitor all access points that the wireless controller manages.

To view the Access Point page:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4. Select Monitor > Controller > Access Point.
The Access Point page displays. Because this page is a wide page, it is shown in the
following two figures.
ProSAFE Wireless Controller
Monitor the WiFi Network and Its Components
328