View Neighboring Clients That The Wireless Controller Detects - NETGEAR ProSAFE WC7500 User Manual

Item
Auth
Client Type
Cipher
AID
RSSI
Tx Power
Tx Rate
Tx Bytes
Rx Rate
Rx Bytes
Tx Packets
Rx Packets
12. Click the OK button.
The Client Details pop-up window closes, and the Clients page displays again.

View Neighboring Clients That the Wireless Controller Detects

You can monitor clients that the wireless controller detects and that are attached to known or
rogue access points.

To view the Neighboring Clients page:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4. Select Monitor > Controller > Neighboring Clients.
ProSAFE Wireless Controller
Description
The security mode that the WiFi client is using to connect to the access
point (Open, WEP, WPA, WPA2, or WPA/WPA2).
The wireless mode that the WiFi client is using to connect to the access
point (802.11ng, 802.11bg, 802.11b, 802.11ac, 802.11na, or 802.11a).
The type of encryption that the WiFi client is using (None, WEP, AES, TKIP,
or TKIP + AES).
The association ID of the client.
The received signal strength indicator (RSSI) of the WiFi client.
The transmit power of the WiFi client.
The transmit rate in Mbps of the WiFi client.
The number of bytes that the WiFi client transmitted.
The receive rate in Mbps of the WiFi client.
The number of bytes that the WiFi client received.
The number of packets that the WiFi client transmitted.
The number of packets that the WiFi client received.
Monitor the WiFi Network and Its Components
337