The wireless controller's web management interface opens and displays the Summary
page.
4.
Select Plans > Planning.
The page displays the Planning icons.
5.
In the building tree on the left, click the + icon of the building that contains the floor.
The floor names display.
6.
Click the floor name.
The floor map displays.
7.
Click the Edit
A pop-up window opens and displays information about the floor plan.
8.
Change the name or dimensions of the floor, upload another floor map, or perform a
combination of these actions.
For more information about the floor settings, see
page 59.
9.
Click the Confirm button.
Your settings are saved.
Change the Name of a Building
You can change only the name of a building, including the name of the default building. All
other building properties are defined through the floors and the floor plans.
To change the name of a building:
1.
Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2.
Enter your user name and password.
3.
Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4.
Select Plans > Planning.
The page displays the Planning icons.
5.
In the building tree on the left, click the building name.
6.
Click the Edit
A pop-up window opens.
ProSAFE Wireless Controller
icon.
icon.
RF Planning and Deployment
Add a Single Floor to a Building
67
on