Add A Single Floor To A Building - NETGEAR ProSAFE WC7500 User Manual

Add a Single Floor to a Building

You can add a single floor to an existing building.

To add a single floor to a building:
1. Open a web browser, and in the browser's address field, type the wireless controller's IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller's login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller's web management interface opens and displays the Summary
page.
4. Select Plans > Planning.
The page displays the Planning icons.
5. In the building tree on the left, click the name of the building to which you are adding a floor.
6. Click the Add Floor
7. Define the floor:
a. Enter a name for the floor.
b. Upload a custom floor map by clicking the Browse button, following the directions of
your browser to navigate to a floor map, and selecting the floor map.
You can upload a plan in .png, .jpg, or .gif format.
c. To either specify the floor width or the floor length, do the following:
• To specify the floor width, click the Width(X) button, select Meter or Feet from the
menu, and enter the floor width.
ProSAFE Wireless Controller
icon.
RF Planning and Deployment
59