Viewing Blacklisted Clients - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual

Viewing Blacklisted Clients

Figure 103.
The Blacklisted Clients screen lets you monitor all clients for which authentication failed or
that were denied access because their MAC address is not defined in a MAC ACL.
Table 46 explains the fields of the Blacklisted Clients table on the Blacklisted Clients screen.
Table 46. Blacklisted Clients Information
Setting
Select
MAC
Type
AP-Name
AP-IP
RSSI
SSID
Count
Last Seen
To see the location of the blacklisted client on a floor map, select the client's radio button (in
the Select column), and then click the Locate button.
Description
The radio button that lets you select the blacklisted client to locate it on a floor map.
The MAC address of the blacklisted client.
The wireless mode that the blacklisted client is using to connect to the access point
(802.11b/bg/ng or 802.11a/na).
The name of the access point to which the blacklisted client is connected.
The IP address of the access point to which the blacklisted client is connected.
The Received Signal Strength Indicator (RSSI) of the blacklisted client.
The wireless network SSID that the blacklisted client is using.
The number of times the client's authentication failed.
The last time that the blacklisted client attempted to log in.
Chapter 11: Monitoring the Wireless Network and Components | 143