Viewing Access Points Managed By The Wireless Controller; Viewing Clients Managed By The Wireless Controller - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual
• 5 GHz Band Usage. Displays combined 802.11a- and 802.11na-mode usage.
• Network Usage. Displays Ethernet usage.

Viewing Access Points Managed by the Wireless Controller

Figure 94.
The Controller Access Point screen lets you monitor all access points that are managed by the
wireless controller. Because this screen is almost identical to the Network Access Point screen,
see Table 38 on page 128 for information about the fields.
To see details about an access point, select its corresponding radio button in the Select
column of the Access Point table, and then click the Details button to display the AP Details
screen. Because this screen is identical to the AP Details screen that you can access from
the Network Access Point screen, see
AP Details screen is shown in

Viewing Clients Managed by the Wireless Controller

Figure 95.
The Controller Clients screen lets you monitor all clients that are connected to access points that
are managed by the wireless controller. Because this screen is almost identical to the Network
Clients screen, see
To see the location of the client on a floor map, select the client's radio button (in the Select
column), and then click the Locate button.
Table 39
Figure 87 and
Table 40 on page 131 for information about the fields.
Chapter 11: Monitoring the Wireless Network and Components
on page 130 for information about the fields. The
Figure 88 on page 129.
| 137