Viewing Clients In The Network - NETGEAR WC7520 - ProSafe 20-AP Wireless Controller Reference Manual

ProSafe 20-AP Wireless Controller WC7520 Reference Manual

Viewing Clients in the Network

Figure 89.
The Network Clients screen lets you monitor all clients that are connected to the network.
Table 40 explains the fields of the Clients table on the Network Clients screen.
Table 40. Network Clients Information
Setting
Select
MAC
IP
AP Location
AP-Name
AP-IP
Building
Floor
Bssid
SSID
Security
Controller IP
To see the location of the client on a floor map, select the client's radio button (in the Select
column), and then click the Locate button.
Description
The radio button that lets you select the client. When you click the Details button,
the corresponding Client Details screen displays (see
can also click the Locate button to see the location of the client on a floor map.
The MAC address of the wireless client.
The IP address of the wireless client.
The location of the access point (see
to which the wireless client is connected.
The name of the access point (see
which the wireless client is connected.
The IP address of the access point to which the wireless client is connected.
The building in which the wireless client is connected to the access point.
The floor on which the wireless client is connected to the access point.
The MAC address of the access point's radio to which the wireless client is
connected.
The wireless network SSID that the wireless client is using to connect to the
access point.
The security mode (Open, WEP, WPA, WPA2, or WPA/WPA2) that the wireless
client is using to connect to the access point.
The IP address of the wireless controller that manages the access point to which
the wireless client is connected.
Chapter 11: Monitoring the Wireless Network and Components
Figure 90
Editing Access Point Information
Editing Access Point Information
on page 132). You
on page 51)
on page 51) to
| 131