Actuator Cable Replacement - Honda S2000 Service Manual

1 .
Actuator Gable Replacement
Remove the actuator cover, and disconnect the 4P
conneclor from the cruise control actuator.
Disconnect the actuator cable end (A), and remove
the cable 1B) from the cruise control actuator.
3. Remove the accelerator pedal assembly.
6 x 1 . 0 m m
1 3 N . m
(1.3 kgf.m,
9.4 tbf.ftl
4. Disconnect the actuator cable end (A) from the arm
(B) on the accelerator pedal assembly {C).
Replace the actuator cable, and install the new
cable in the reverse order of removal.
Adjust the actuator cable on the cruise control
actuator side (see page 4-46).
4-45