Mitsubishi Electric MELFA CR750 Series User Manual page 444

(5) IN / OUT
Select input / output of signal.
When [Source] / [Reference side] is robot, select [IN] or [OUT]. When [Source] / [Reference side] is robot,
fixed by the [IN].
When it is GX Simulator2, this item is not visible.
(6) Start #
Specify a starting number of a device.
For input range of this item, refer to Table 19-2 Input range of [Start #]/[End #] .
(7) End #
Specify an ending number of a device.
When [Simulation operation] is [Signal value copy], the [End #] of destination is filled in automatically
according to [Start #] and [End #] of source.
For input range of this item, refer to Table 19-2 Input range of [Start #]/[End #] .
[Signal type]
[PIO]
[CC-Link(Link relay)]
[CC-Link(Link register)]
(8) Data type
Specify the Data type of [Signal value].
Select from [Bin], [Dec] and [Hex].
(9) Signal value
Specify the output signal value. The set value is treated in the specified [Data type].
19-444
Please set the start and ending numbers to within 32 points.
Table 19-2 Input range of [Start #]/[End #]
[Source]/[Destination]/[Reference side]/[Setting side]
Robot
0～40960
6000～8047
6000～6255
GX Simulator2
0～65535（0xFFFF）
19-444