Installation, Uninstallation; Installation - Mitsubishi Electric MELFA CR750 Series User Manual

1.5.

Installation, Uninstallation

This section explains the method for installing the software and the method for uninstalling it.
Caution
Uninstall RT ToolBox2 before installing.
If "RT ToolBox2" has already been installed in the personal computer, it is necessary to uninstall
it before "RT ToolBox2" is installed.

1.5.1. Installation

Caution
When installing, log in as a user with administrator authority.
When installing, log in as a user with administrator authority. The system will not let you install if
you log in as a user who does not have administrator authority.
Caution
Please input product ID attached to RT ToolBox2 again when you install a
standard version of RT ToolBox2 in the personal computer in which "iQ
Works(MELSOFT Navigator" is installed.
When RT ToolBox2 is installed in the personal computer in which "iQ Works(MELSOFT
Navigator)" is installed, product ID for "iQ Works(MELSOFT Navigator)" is displayed on "Input
Product ID" screen. RT ToolBox2 is installed in the personal computer as mini version when this
software is installed with this Product ID. Please input product ID attached to RT ToolBox2
product again when you install a standard version of RT ToolBox2.
Install this software with the procedure below.
(1) When you insert this product into the computer's CD-ROM drive, the setup screen is displayed
automatically.
(2) If the setup screen is not displayed when you insert this product into the computer's CD-ROM drive,
display the setup screen with the following method.
1) Display the [Run] dialog.
OS
Windows XP / 7
Windows Vista
Windows 8 / 8.1 / 10
2) Check the CD-ROM drive name, then input "drive name":\Setup.exe.
(If the CD-ROM drive is "D:", input "D:\Setup.exe".)
1-25
Table 1-4 Method of displaying the [Run] dialog
Select [Start] button -> [Run].
< In Windows Vista, when using the [Start] menu with the classic
display>
Select [Start] button -> [Run].
< In Windows Vista, when not using the [Start] menu with the
classic display >
Click [Start] button -> [All Programs] -> [Accessories], then select
[Run].
Press the [Windows] + [R] key.
Start method
1-25