Usage; How To Use This Document; Checking The Product; Checking The Package - Mitsubishi Electric MELFA CR750 Series User Manual

1. Usage

This explains precautions you need to know before using this software.
1.1.

How to Use this Document

The manual is in the CR-ROM as the Adobe PDF file.
D:/Doc/BFP-A8618.pdf
For reading the manual, Adobe Acrobat Reader Ver.5.0 or more is required.
If Adobe Acrobat Reader isn't installed, please download from following Adobe Systems Incorporated URL (As
of September, 2009)
URL: http://www.adobe.com/
1.2.

Checking the Product

1.2.1. Checking the package

Please check if all items shown below are included in the package.
- CD-ROM "RT ToolBox2"
- Setup Guide
- END-USER SOFTWARE LICENSE AGREEMENT
- License Certification
(Please make sure Product ID is printed on it.)
* Please contact the branch office or the agency if there is some shortage in the package.

1.2.2. Checking the CD-ROM contents

The CD-Rom has the following configuration.
/:
:
:
・・・・・・・
Doc
・・・・・・・
Utility
・・・・・
Sample

1.2.3. About the "MelfaRXM.ocx" communications middleware

MelfaRXM.ocx is the ActiveX control that communicates to robot-controller. You can create the Windows
Application of "MELFA ROBOT" by using this control.
You can use "MelfaRXM.ocx" in only standard version of this software.
For information on how to set up "MelfaRXM.ocx", refer to "20 MelfaRXM.ocx Communications Middleware
Setup".
In case of using only the function of "RT ToolBox2", you don't need to install this software.
1-21
(Example for the CD-ROM drive is "D:".)
The files for installagion of this software
This manual (pdf)
The folder for setup of the communication middleware "MelfaRXM.ocx"
The sample data (Layout, Hand model)
1-21