Mitsubishi Electric MELFA CR750 Series User Manual page 389

17.3.5.3. Robot information
Select the [Project name]/[Robot model] checkbox, the project/robot's model name is displayed in the 3D
monitor. The robot's model name is displayed near a robot's mechanical interface position. When the project
name and the robot's model name are displayed, the project name is on the upper row and the robot's model
name is displayed lower row. It is possible to select the size of the character from three kinks.
Figure 17-24 Display the project name and the robot's model name
17.3.5.4. Collision area
Select the [Display the collision area] checkbox, the model of collision area is displayed in the 3D monitor.
The model is displayed the color which is set in the [Color] button (a default is read).
17-389
Figure 17-25 Display the collision area
17-389