Mitsubishi Electric MELFA CR750 Series User Manual page 202

Hide thumbs Also See for MELFA CR750 Series:

Table of Contents

11.6.2.2. Device & Line

You can set the parameters related to devices and lines in the robot controller.

Figure 11-57 Ethernet parameter – Device & line (Version 3.00A or later)

Select the device to edit and click the [Set] button. The "Device parameter setting" screen is displayed.

Figure 11-58 Ethernet parameter – Device parameter setting (Version 3.00A or later)

If you select the [MELFA-3D Vision] or [Network Vision Sensor (2D)] item from the [Autoconfiguration]

combobox, contents of the screen take on the value corresponding to the selected item.

Melfa cr700 series Melfa cr500 series Melfa rt toolbox2Melfa rt toolbox2 min