Melfa-Basic Iv And Movemaster Command Command Statement Editing - Mitsubishi Electric MELFA CR750 Series User Manual

8.6.2. MELFA-BASIC IV and Movemaster command command statement editing

When writing a program using MELFA-BASIC IV or Movemaster commands, step numbers like those of
MELFA-BASIC V are not displayed. Input the line number at the front of the command statement.
Caution
For MELFA-BASIC IV and Movemaster commands, input line numbers.
Step numbers are not displayed on the MELFA-BASIC IV and Movemaster command edit screen.
When using MELFA-BASIC IV and Movemaster commands, always input line numbers.
If there are no line numbers, this is a syntax error.
Line numbers
There is a function for sorting commands in order of line number even if you do not input them in order of line
numbers. For details, see "8.6.4.16 Sorting".
There is a function for reordering commands in order of line number even if you do not input them in order of
line numbers. For details, see
8-109
Figure 8-20 MELFA-BASIC IV Command Edit screen
Figure 8-21 Sorting
When this is written to the
controller, it is converted
into all uppercase
characters, which is correct
MELFA-BASIC IV format in
the controller.
Figure 8-22 MELFA-BASIC IV Character Input
OK
Syntax error
8-109