Mitsubishi Electric MELFA CR750 Series User Manual page 430

The axis load level (J1-J6 each axis) and the tact time are displayed for the robot that can measure the axis
load level.
The calculation result of the axis load is displayed with %.
The current tact time
measurement results
are displayed.
Figure 17-73 Tact time Measurement Results (The axis load level calculation is possible.)
17-430
The current axis load level
measurement results are
displayed.
The tact time and axis load
level calculation results are
added sequentially.
This information is cleared
when the simulation is
started again.
17-430